Schwenk 31300501 Indicating plug Gauge OD Range 150.1-160 mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version CAL2 B1 Vision Engineering EVP070 Power unit

Vision Engineering EVP070 Power unit (standard)

setting ring

It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design

Equivalent to Q-Mark part number: TM2-1036-BC

Swivel spigot standard on all models

Schwenk 31300501 Indicating plug Gauge OD Range 150.1-160 mm h=1.2 Ø, Sleeve Dimension H=55.00mm, Blind Hole Version CAL2 B1 Vision Engineering EVP070 Power unitApplication For quick comparison measurements of bores during series inspections. The slightly undersized, ground sleeve is used to guide and centre the plug gauge in the bore. Execution Cemented carbide measuring contacts and measuring needles (wear resistant) Plug gauge from dia. 130 mm can be supplied as a cross shaped sleeves or cross shaped sleeves with skids Version for blind holes with reduced face size Advantage Easy to use Minimum measuring