8 x 4 x 1000mm MW Carbon Tubing Matte Finish servo-accessories but it was still capable

but it was still capable for the same blistering DS speeds

Sold in a set of four

Power your receiver with 2s and your fuel pump with 3s via the two XT30 inputs and outputs or perhaps use it as a redundant switch for whatever high amp draw application you have in mind

The prop may be fitted directly to the motor shaft using the supplied tapered collet adapter or alternatively

Fly it in the morning

8 x 4 x 1000mm MW Carbon Tubing Matte Finish servo-accessories but it was still capable8 x 4 x 1000mm Mandrel Wound Matte Finished Carbon Tubing. The carbon tubes are constructed with a combination of unidirectional and woven carbon fabrics and are mandrel wound. The tubes can withstand rather extreme tension, compression and torsional loads as well as being very resistant to crushing and splitting.