077: HS-200-LV / 2x 15cm 8AWG (Shipment 15th of August 2026) a linear LDO (LM1764A) to

a linear LDO (LM1764A) to remove the ripple

if you need a different output voltage on output 2 or 3 -> Output 1 can't be changed and must remain 5

based on Allegro Hall Sensor ACS-100U

2x Input cable / Molex / Click-Mate / 2

or 4 -> Output 1 can't be changed and must remain 5

077: HS-200-LV / 2x 15cm 8AWG (Shipment 15th of August 2026) a linear LDO (LM1764A) to200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x15cm AWG8 wire (red) as a standard. The board