3.5" Double Groove B Section 5L Sheave with 1" H-Style Split Taper Bushing - 2BK34H Heavy Duty (26 Amps Max) • 1/4" x 100'

• 1/4" x 100'

wherever a variable pressure relief valve is required

One new 3/4" flare x 3/4" male NPT in tank air compressor check valve with dual side ports

• 50' x 1/2"

They incorporate a discharge unloader on the body of a pilot valve to allow one valve to sense system pressure and vent discharge air to atmosphere when compressor reaches maximum pressure

3.5" Double Groove B Section 5L Sheave with 1" H-Style Split Taper Bushing - 2BK34H Heavy Duty (26 Amps Max) • 1/4" x 100'Cast Iron 3. 5" Dual Groove Belt B Section 5L Pulley w 1" Sheave Bushing Masterdrive dual groove 3. 5" cast iron pulley sheave with 1" H bushing for B section belt is a high quality 2 piece pulley that measures 3. 5" outside diameter and is designed to be used with an H style bushing. This bushing inserts into the center of the pulley and slides over the shaft, as you tighten down the bolts on the H bushing it will tighten down on the shaft. This