1.25 MM 12 PIN JST Male & Female Wire Connector dc switch A dual in-line package (DIP)

A dual in-line package (DIP) switch is a manual electronic package that is composed of a series of tiny switches

1 male and female headers because each terminal has a single corresponding pin separated every 0

These are Carbon Film Resistor with a value of 91k ohm 1/4W and tolerance of ±5%

9mm Length 5 meters Operating Temperatuure -25°C to +80°C

These are Metal Film Resistor with a value of 470k ohm 2W and tolerance of ±5%

1.25 MM 12 PIN JST Male & Female Wire Connector dc switch A dual in-line package (DIP)A male connector is commonly referred to as a plug and has a solid pin for a center conductor. On the other hand, a female connector is commonly referred to as a jack and has a center conductor with a hole in it to accept the male pin. The terms male and female always refer to the threads on the fitting. The male threads are on the outside like a bolt and the female threads (female fittings) are on the inside like a nut. Male threads screw into female