ABS Sunset Elixir ABS Filament 1.75mm, 1kg Quantity:1 kg spool Coex 3D recommends always using

Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed

you will need multiple of these rails (please check your BOM if you're making build to confirm how many mms you need and the correct quantities)

Video showing the BTT V1

Check that your build plate is flat by laying a steel ruler on the edge across it in all directions and see if there is any light passing between it

and you’re ready to 3D print

ABS Sunset Elixir ABS Filament 1.75mm, 1kg Quantity:1 kg spool Coex 3D recommends always usingWe are really excited to introduce you to Cookiecad ABS filament in unique and interesting colors. ABS prints stronger than classic PLA and PETG but requires different printer settings and an enclosed printer. This is Sunset Elixir. It is a blue to pink gradient with a blue shimmer truly magical! It is the same shade as our Sunset Elixir PLA. Just note that side by side they will look a little different due to the difference in material properties.