90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (25.0 mm OD, 114.3 mm CLR) 1-1/8" OD Centerline Radius: 2-1/2" (50

Centerline Radius: 2-1/2" (50

This portable 120V powerhouse will bend any angle to 180° in up to 2" tubing or NPS 1-1/2 pipe

SE allows for dxf/step/iges/ interfacing (with the Import/Export module)

This die fits the 105 Brute Tube and Pipe Bender for bending 1-1/8" OD round tubing at a 3" centerline radius with a maximum degree of bend of 90 degrees after springback

Maximum Size: NPS 2 (DN 50)

90 Degree Round Tube Die for 105 Brute Tube and Pipe Bender (25.0 mm OD, 114.3 mm CLR) 1-1/8" OD Centerline Radius: 2-1/2" (50Specs Outside Diameter of the Tubing (OD): 25. 0 mm Minimum Wall Thickness (DOM): 0. 058 (1. 5 mm) Minimum Wall Thickness (4130): 0. 058 (1. 5 mm) Minimum Wall Thickness (ERW): 0. 065 (1. 7 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4 1 2 (114. 3 mm) Maximum Degree of