Northcote Pottery Glaze Stoneware Clear Crackle 500ml clay Warmth will speed up the

Warmth will speed up the setting reaction but adhesive should not be applied to hot areas (above about 80°C) as it may gel rapidly and the adhesive properties will be adversely affected

Fired colour (reduction): Golden brown mottle with small iron blebs

AMACO Potter's Choice | PC-34 Light Sepia

Cone 6 oxidation: Mirror Black creates a highly reflective

Cone 5 is recommended but you can fire up to cone 10 (Large lids or very thin ware are susceptible to slumping if fired too high

Northcote Pottery Glaze Stoneware Clear Crackle 500ml clay Warmth will speed up theTranslucent Stoneware Brush On Glaze with a Glossy Crackle Finish Firing range: 1280C 1300C Proudly Australian made Instructions: Stir thoroughly before use Apply 3 4 coats of glaze using a soft brush Allow glaze to dry in between coats Fire glaze to recommended temperature Test all products to ensure suitability for your requirements as glaze application, clay type, firing atmosphere and glaze flow can vary greatly.