Styrene Wax 5% Foam Core this is what allows it

this is what allows it to be flexible

Pump sizes available are:

Flowcoat requires Catalyst MEKP at 2% to enable it to harden (SOLD SEPARATELY)

1 x 600ml mixing pottles (different to picture shown)

This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges

Styrene Wax 5% Foam Core this is what allows itThis Styrene Wax is a 5% paraffin dissolved in styrene. When paraffin is added to resin, the wax will rise to the surface and protect the curing resin from the inhibiting action of the air. Once the resin is allowed to fully cure, it must be sanded off prior to any additional applications. Any paraffin on the surface will prevent adhesion of further coats. Mix at 2 5% for thin coatings.