23AWG Single Strand Breadboard Connecting Wire (Black and Red - 1+1 Meter) [C] DIP Switches Operating Voltage is +5V

Operating Voltage is +5V

To connect it with your Arduino or Raspberry Pi connect the TX and RX pins to the controller and power the device with VCC pin connected to 5V pin

As LEDs are arranged as 8×8 sets of rows and columns

This wick is very useful when you are doing heavy de-soldering work

The maximum input current at 18V is 1uA whereas 100nA at 18V and 25°C

23AWG Single Strand Breadboard Connecting Wire (Black and Red - 1+1 Meter) [C] DIP Switches Operating Voltage is +5VThis is a set of single strand hook up wires that can be used to make simple breadboard connections during prototyping. They are used as an alternative to the connecting jumper wires. A single set consists of two flexible wires, each of 1 meter length. One wire is of a red colour and the other wire is of a black colour. This a high quality set that creates firm and neat connections. The copper conductors in the wires are tinned to reduce oxidation and