Fox 2.5" Shock #95 Rebound Shim Stack Set For 7/8" Shaft Shocks Or 1-5/8" Shaft Air Shocks Breathers torque capacity and heat capacity

torque capacity and heat capacity

O Number D-550-4)

934 CV joint cages are available in chromoly or 300M steel

NHBB New Hampshire Ball Bearing: NHB-ABWT12

Uses Standard 2-1/4" Vertical Bolt Pattern Cylinders

Fox 2.5" Shock #95 Rebound Shim Stack Set For 7/8" Shaft Shocks Or 1-5/8" Shaft Air Shocks Breathers torque capacity and heat capacity803 10 095 a On the bottom cap, where the shaft enters the shock, Fox will usually stamp what valving they put inside the shock. For example 50 70 which is #50 compression and #70 rebound. Any time you revalve your shock, it's a good idea to replace the stover nut. You can download any of the Fox shim stack charts below for reference. The lower the number is, the faster the shock reacts. The higher the number is, the slower the shock reacts. For