Fixed Mounting Flat Base for Electric Linear Actuator A (Model 0043070) CB Remotes 1000M/3000Ft such as model C-2 /

such as model C-2 / C-3 / C-4 (100M)

1) Must turn 7-gang and 8-gang to OFF position after deleting the transmitters

2) Connect the positive pole of lamp to terminal "L / +" of OUTPUT

DC Power Output: It can control DC equipment with a voltage in the range of 10~80 VDC

Press Button D again → Relay 4 deactivates (device 4 OFF)

Fixed Mounting Flat Base for Electric Linear Actuator A (Model 0043070) CB Remotes 1000M/3000Ft such as model C-2 /Fixed mounting flat base for electric linear actuator A Aluminum material. Can be used to replace the linear actuator A bottom mounting bracket. Can be used for vertical mounting linear actuators A Installation operation: 1. Use a hexagonal wrench to unscrew the three screws at the bottom of linear actuator A and remove the original bottom shell. 2. Install the flat base to the bottom of linear actuator A and tighten the three screws with a hexagonal