Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 Use with our Aluminum Splicing

Use with our Aluminum Splicing Nipples (HJ51 and HJ45) and Lined Hose Clamps (Part No

These 45 degree reducer elbow hoses have a 70mm ID at one end and a 63mm ID at the other end to connect a 2 3/4" OD tube to a 2 1/2" OD tube

They eliminate a lot of metal and sharp edges under the hood

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

The 4-ply reinforcement results in a 5mm wall thickness (93mm / 3 5/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 Use with our Aluminum SplicingOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). This 90 degree elbow has a 1 2" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating in