Silicone T-Hose, 60mm (2.38") ID w/25mm (1") ID Branch sbc20 Use with our Aluminum Splicing

Use with our Aluminum Splicing Nipples (HJ102 and HJ76) and Lined Hose Clamps (Part No

This size is recommended for our 2 3/4" (70mm) ID silicone hose when used with our HJ70 hose joiner

The legs measure at least 4 inches long (measured from the centerline bend radius)

HJ13) and Lined Hose Clamps (Part No

5mm wall thickness (54mm / 2 1/8" and 47mm / 1 7/8" OD) and a working pressure rating over 28 psi (140 psi burst pressure)

Silicone T-Hose, 60mm (2.38") ID w/25mm (1") ID Branch sbc20 Use with our Aluminum SplicingOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is