Silicone T-Hose, 32mm (1.25") ID w/25mm (1") ID Branch SHH32-RED These hump connector hoses have

These hump connector hoses have a 51mm ID to provide a flexible coupling between two 2" OD tubes

5 Inch 3 Inch 4 Inch 5 Inch Pressure 24 psi 20 psi 19 psi 16 psi 14 psi Vacuum 20 in Hg 18 in Hg 16 in Hg 13 in Hg 10 in Hg * For straight lengths of hose at 72° F

The 2-ply construction also withstands higher pressure and vacuum than our Single-Ply Silicone Air Duct Hose

These 180 degree elbows have a 1" ID with a smooth

Operating pressure rating 28 psi

Silicone T-Hose, 32mm (1.25") ID w/25mm (1") ID Branch SHH32-RED These hump connector hoses haveOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is