Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE HJ35 and HJ28) and Lined

HJ35 and HJ28) and Lined Hose Clamps (Part No

Use with our Aluminum Splicing Nipples (HJ70 and HJ63) and Lined Hose Clamps (Part No

The 3-ply reinforcement results in a 4mm wall thickness (43mm / 1 11/16" and 38mm / 1 1/2" OD) and a working pressure rating over 27 psi (135 psi burst pressure)

5mm wall thickness (37mm / 1 1/2" and 35mm / 1 3/8" OD) and a working pressure rating over 50 psi (250 psi burst pressure)

Four layers of aramid reinforcement and 3 reinforcing rings allow operating pressures of 42 psi (170 psi burst pressure) and temperatures up to 500° F (260° C)

Silicone T-Hose, 38mm (1.50") ID w/25mm (1") ID Branch SHL51-BLUE HJ35 and HJ28) and LinedOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is