Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black Use them to connect any

Use them to connect any two 57mm ID hoses: an elbow to a straight section

The 4-ply reinforcement results in a working pressure rating in excess of 35 psi and a 5mm wall thickness (61mm / 2 3/8" OD)

These four-meter (13 foot) long straight hoses have a 5/8" (16mm) ID with a smooth

Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot

5mm wall thickness (44mm / 1 3/4" and 37mm / 1 1/2" OD) and a working pressure rating over 35 psi (175 psi burst pressure)

Silicone T-Hose, 63mm (2.50") ID w/25mm (1") ID Branch Color:Black Use them to connect anyOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1. 5" long. Note: This hose is