Silicone Hose, 7/8" I.D. 180 degree Elbow, 4" Legs Metric_63mm Use our Hose Joiners (HJ19)

Use our Hose Joiners (HJ19) and our Lined Hose Clamps (Part No

These 45 degree reducer elbow hoses have a 70mm ID at one end and a 63mm ID at the other end to connect a 2 3/4" OD tube to a 2 1/2" OD tube

These 135 degree elbows have a 2 3/4" ID with a smooth

This cap features the same water- and coolant-compatible silicone rubber formulation as our silicone coolant hoses

The 4-ply reinforcement results in a 5mm wall thickness (93mm / 3 5/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

Silicone Hose, 7/8" I.D. 180 degree Elbow, 4" Legs Metric_63mm Use our Hose Joiners (HJ19)Our silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 7 8" ID with a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the